GMP monoblock/modular solid partitioning walls are fabricated by way of nominal 2x1/0.8/1mm hot dipped galvanized steel sheets conforming to JISG 3302/94, LFQ, light chromated, zero spangle with a zinc coating of 120gsm. They are bonded with an infill of honeycomb paper core or high density mineral wool, forming a rigid 80mm thick panel to modular widths of 160mm to 1200mm and 2440mm to 6000mm in height.

GMP modular walls have been installed in clean rooms throughout the world in a range of applications from high technology electronic manufacturing to legislation-controlled healthcare packaging.

The system is readily adaptable to meet the requirements of most clean room classifications as determined by cGMP grades used in pharmaceutical applications. Make-up panels are produced within the sizing layout of the drawing. Pre-treatment of panels is done by way of Corro-Zinc 97 and epoxy polyester powder coating of 60/80 microns forming a smooth surface finish.

A complete range of partition walls and ceiling systems are available to meet the technical specifications of controlled environment rooms. Ceilings as well as partitions are inert, non particle-shedding, forming part of a clean room aseptic envelope to enable compliance with FDA validation procedures and cGMP standards.